Cable & Wiring Accessories
From October 2012 new EU directives come into force which require all new trailers to be fitted with a reverse lamp. These may be wired using 12n/12S 7 pin plug and sockets or the single 13pin plug and socket. During 2012 Ifor Williams trailers will migrate to having the reversing lamp fitted as standard along with the 13 pin plug.
To allow trailers fitted with 13pin plug to be used on vehicles which have the 7 pin socket, an adaptor is required. This adaptor is available under the Ifor Williams part number P06625-7-13 or the Maypole part no MP600, allowing the 13 pin plug to be connected to a towing vehicle with a 7 pin socket.
Product Compare (0)
Name (A - Z)
Name (Z - A)
Price (Low > High)
Price (High > Low)
Model (A - Z)
Model (Z - A)
Flat section cable for low wattage applications such as Ifor Williams side marker lamps or interior lamps - sold by the ..
Availability: Call to Order
For wiring between Ifor Williams trailers junction boxes or making up trailer lighting cables - sold by the metre..
Coiled Lighting Cable / Suzzy lead with a 7 Pin Plug on one end & 13 Pin plug on the other end, this is suitable fo..
Trailer extension leadCoiled Lighting Cable / Suzzy lead with a metal 7 Pin Plug on one end & metal 7 Pin plug on th..
Coiled Lighting Cable with a 7 Pin Plug.
Pre-wired front cable assembly, connects into the front junction box on hor..
Ifor Williams Lighting Cable with 13 Pin Connecting Lead Plug to Plug AS8384.
To fit the new Ifor Williams trailers wi..
Ifor Williams Lighting Cable with 7 Pin Plugs at either end. The wire between the 7 pin plugs is 226cm long. Direct re..
Junction box. Hinged lid box with 10 opeinings and 10 connector rails each having 8 flag terminals, with wiring guide in..
Ifor Williams Grommet
Lightly skinned over to use as a blanking grommet, can be easily pierced to accept flat or rou..
Ifor Williams junction box lid to fit P06799 Junction Box, complete with rubber seal
Availability: Out Of Stock
Ifor Williams Cable Clips Pk25 Hammer fitted to drawbar or chassis rail, these clips can carry several cables..
Front cable clip. Used on most models to hold the 7 core cable
Aqua safe plug and socket. Waterproof plug and socket used for the interior lamp connector on DP trailers and the hand..
Lighting Socket Type 12N. This black socket is sometimes found on the front of older trailers, or an ideal replacement..
Parking Socket. Fit to the front of any trailer to plug & protect your lighting cable when not in use.
7 pin lighting plug type 12N. This black plug is the standard connector for the basic lighting functions (screw connecti..
Ifor Williams Socket Gasket Provides a seal behind 12N or 12S sockets, includes tail for cable sealing..
7 pin to 13 pin adaptor to enable a 13 pin lighting cable which is fitted to the trailer to be fitted to a vehicle with ..
Number plate holder.
Wide plate type with twin rubber clips.
N.B. This number plate will not fit the Ifor Williams LM/..
Number plate holder. Square plate type with one rubber clip.
Showing 1 to 20 of 24 (2 Pages)